Review of the Berserker B3 MTL RTA vape tank from Vandy Vape

I still managed to purchase an original tank from Alex from Vapers MD at a good price.

The article is intended for people over 18 years of age and who want to quit smoking!

As far as I understand, this is the third attempt by Alex and Vandy Vape to create a great MTL (cigarette puff) tank.

The tank comes in a beautiful, high-quality box. There is a transparent window on top through which the color of the tank is visible, which is very convenient.

On the bottom side there is a description of the delivery, a warning against children and animals, as well as features that distinguish this tank from others.

The tank is made in China.

On one side there is a QR code with a protective stripe. If you wipe off the protective layer with a coin, you can use your smartphone to check the authenticity of the delivery.

Without exaggerating, we can say that the delivery set is luxurious, the only thing missing is cotton wool, but it can be bought at any pharmacy.

At the very bottom there is a manual and spare accessories.

The instructions have a section in Russian.

I, however, could not find the "Accessory Bag" which is listed in the "Product Components" of the instructions.

Such detailed instructions can now only be found in professional products.

The manufacturer spent a lot of time on the instructions. Well done.

The delivery set even includes three drip tips (mouthpieces) of different configurations and lengths.

The spare parts include Philips screws, orings (rubber gaskets), an additional gasket for the lid, coils (heating coils) and a shaft (adapter) to change the volume of the tank.

Complete coils are made of nichrome alloy 80, 0.74 Ohm, 6 turns, with a coil diameter of 2.5 millimeters.

Also included is a plastic container for >4 ml (approximately >5 ml).

And a glass container for >4 ml (approximately >5 ml).

Many people took birches only because of the excellent drip tips that come with the kit.

Air is supplied through an injector, which has one oring.

Everything is great in this delivery kit, except for one thing - there is no 1.0 mm injector. 0.8 mm is small, but 1.2, which costs a lot by default. In this case, it is not like taking a puff of cigarettes.

The injector is inserted without any thread. It can be quickly changed by turning the tank upside down. Despite. that the injector rests on one oring, there are no leaks.

Injector visiblethrough the mine.

The tank has bottom airflow.

The appearance of the tank is ascetic and therefore beautiful. High quality workmanship, as well as weight, immediately inspire confidence in this tank.

The tank lid has a bayonet system, that is, we turn the lid and lift it. Fast and reliable.

The opening for filling liquid is large; it's impossible to miss. In addition, through these holes you can see the liquid level.

Out of the box, the tank comes with a capacity of 2 milliliters, which has disadvantages. The main disadvantage is that even through transparent glass you cannot see how much liquid is left.

Based on this, it is possible to change the flask to a larger volume. This is not difficult to do.

It is necessary to unscrew the lid of the flask along with the flask. Most buyers have a problem removing the glass flask from the lid. I already thought that I would have to break it, but I still managed to remove the flask.

Next, you need to take the shaft extension from the delivery kit and screw it tightly.

Depending on your preferences, take a plastic or glass flask.

Install the flask on the lid of the container.

Next, screw the lid together with the flask to the body.

The workmanship is at such a high level that is rarely seen today.

For ease of winding the spiral, there is a symmetrical ring that can simply be removed from the base.

The tank has two coil stands.

The kit includes two coils.

I purchased similar coils for MTL tightening.

Due to the design feature, it is necessary to use the entire half of a standard cotton braid.

The cotton wool must be laid with the ends tucked in so that cotton balls are formed at the ends. Before installing the cotton wool, you need to calcine the 14-watt heating coil by briefly pressing the power supply of the box mod on which you will use the tank. To prevent the coils from sticking to each other, you need to move them during heating.

Cotton balls must tightly cover the flow holes, otherwise the tank will dry out.

Next, you need to moisten cotton wool with liquid, screw on the flask, pour in liquid and close the lid.

The tank looks natural with the Thelema Solo 100W box mod from Lost vape.

When purchasing, you must take into account that if you have physiological parameters like me, that is, you get TH (throat hit, hit in the throat) where it shouldn’t be, then you will get certain problems when using the device. Everything seems to be fine, but you can only use liquids with 0% nicotine or a maximum of 3%.

Considering that most manufacturers skimp on flavors, it is pointless to write about some kind of bright taste, since any disposable electronic cigarette will beat any vaping device in this regard. Moreover, the tank for a cigarette puff and the amount of steam are noticeably lower than the bulk tanks. However, if you set the injector to 2 millimeters, there will be a lot of steam and taste too.

Berserker wouldn't be himself if he didn't piss himself at least once. I had it leak at night through the air intake holes. Probably after releasing the pressure this no longer happened - it was completely dry.

Very nice and thoughtful device. If you have questions, write in the comments. Comments will be automatically added to the forum.

Developers and manufacturers have taken not just a step towards improvement and quality of the device, but simply a huge leap forward. The unstable situation in the world simply dictates the need for such a tank for smokers.