Scouring

Topic on the grinding (thinning) of natural leather.

Tired of cutting with a knife, so I bought a manual machine for scraping. There is nowhere to put the machine and there are no such volumes.

The kit included screws and a hex key.

Also a pack of blades. The blades are blunt, so I installed a Stanley.

The blade offset must be adjusted immediately.

The springs are powerful, it is impossible to work without fastening to any surface.

Wide surfaces cannot be doubled, only stripes up to 6 centimeters.

The seller stated that it was stainless steel, but everything is a little, but magnetized.

Stoics curves, but the machine works.

The shaft is mounted on bearings, but there is play.

The shaft is mounted on bearings, but there is play.
If you have questions or suggestions, then ask.