Another confirmation that there is a difference in taste and vapor density between the breeches.
This article is intended for people over 18 years of age who want to quit smoking!
This clone of the Kayfun BB bridge from the famous company SvoëMesto made in China Wolfcoolvape and it took a very long time to come from China. I already thought that he would never come. Most likely, if I knew about the taste and features of the original bridge, I would have made every effort to purchase the original product, and not spend money on a bunch of all sorts of clones and not so much. After all, I still remember the former glory of Kayfun in the tank form factor. The Chinese, by the way, still produce them.
In this case, the Chinese tried to copy everything with high quality, even the box.
The bottom side of the packaging states that the design was developed in Russia, and the bridge was made in Germany.
One of the sides of the box has an inscription: "Keep out of reach of children", and if translated literally, then "Protect the device from children" :-)
The other side of the box indicates "Dropper compatibility". I did not understand this drawing what it means.
The Chinese even tried to copy the protective sticker.
A business card was included with the box.
The production and sale of clones at Wolfcoolvape is set on a grand scale - there is not only a decent website for the Chinese, but also accounts in European social networks.
Interestingly, even Svoemesto itself does not write such epithets about itself.
The Chinese even made a box similar to the original.
The box does not have any stickers except for the embossed logo and the company name.
When I was carrying the box from the Post Office, something dangled and rattled suspiciously in it; and in fact, the bridge itself and the additional domes were piled in a pile in the box and bumped against each other. They could at least put the bridge and the domes in bags so that they would not scratch each other during shipment.
This Chinese delivery differs from the German one in that it immediately has additional details, for which the Germans have to pay extra. In addition, the Chinese have cutouts for domes in the box, which the Germans do not have.
The manufacturer immediately writes on his website that the bridge for MTL (cigarette) puff and no KVD and, moreover, it cannot be a puff. Based on this, a steam pipe shaft with an internal diameter of about 3.5 millimeters was made.
The steam pipe shaft has thick walls, which is good - there will be no deformation during heating. And in general, with such a thickness, the steam line will not have time to heat up.
The steam pipe does not have an orifice or a thread for mounting.
The oring for attaching the steam line is located inside the dome of the evaporation chamber.
The engraving of the evaporation chamber is as close as possible to the original.
The depth of the engraving on the domes differs from each other.
The dome of the evaporation chamber is attached to the base with a thread, not an oring or by friction, which is just fine and would be very good to do by default for all breeches. The probability of that decreases. that the dome will be removed when the steam line is shifted. It also simplifies the installation of a bridge in a boro tank.
The three domes of the evaporation chamber have a different shape of the inner part, to obtain a different taste from different liquids.
Kayfun BB "Complex" camera: This camera is adapted for gourmet and fruity e-liquids and other complex mixtures. It allows you to best express the different notes of flavors present in the e-liquid, offering a rich and varied experience.
Sweet Kayfun BB: This camera provides an optimal vaping experience by placing soft notes of classic e-liquids such as NET. It also reduces heat transfer to the body due to the high dome, which provides pleasant steam.
To service the bridge, it has a 510 connector thread, closed with a smooth nut.
For aesthetics, there is a smooth nut with a taper to hide the threads.
The Chinese tried and even made an inscription from the bottom of the base.
The base is a copy of the Kayfun mini tank, only with a thread for the evaporation chamber dome.
The liquid supply holes are small, two in each bath.
The base is made to a high standard from a single piece of metal.
The small size of the bridge with a diameter of 13 millimeters can be clearly seen in comparison with the stock base from the Centaurus B80 AIO LSVP-90-B.
Kayfun BB is equipped with the superior AEROKON airflow control system.
The AEROKON Airflow Control system is the first system for MTL nozzles that does not restrict the air flow at the inlet of the duct, but delivers it directly under the spiral. This creates an acceleration of air flow onto the coil, making it uniform and constantly controlled. This innovative design delivers a smoother, more uniform flow of accelerated air to the coil.
This air supply design gives:
Better performance on MTL installations
Best taste
Optimized steam saturation - denser steam
Quiet bridge.
After unscrewing and removing the AEROKON system, the positive strut falls out of the base.
The insulators are made of PEEK plastic.
The racks have curbs for easy installation of the coil, but the screw head has a smaller diameter, so it is not much easier to tighten the coil legs.
The air in the AEROKON system is supplied through a variety of small holes.
You can smoothly adjust the air flow from 0 to 1.8 millimeters using a small screwdriver.
The Chinese wouldn't be Chinese if there wasn't some kind of joint. In this case, I barely unscrewed the air flow regulator.
The air flow is adjusted using a special, cone-shaped screw that closes or opens the air supply opening.
Do not forget to wash a new or used device by someone after disassembling it.
I have spirals winding in the other direction. I didn't rewind it, I didn't have time. 1.9 Ohms came out.
Laying cotton wool is simple - nothing needs to be pushed anywhere, we put pigtails in the baths and that's it.
In this case, I used Tobacconist The World liquid with a 50/50 ratio and a strength of 6.
The bridge is beautiful for its conciseness and such a logo.
Kayfun BB bridge gets into the boro tank from Ambitions without any problems. I draw the attention of the owners of the Centaurus B80 AIO LV-90-B to the fact that this tank does not have a crossbar from the bottom of the tank, so it fits into this AIO system without any problems.
When you start to learn something in a new field, you get interested; then everything gets boring. This bridge gave an impetus to new sensations due to the fact that it gave liquids a new, rich taste.
Kayfun BB bridge is not only delicious, but also gives a couple density, which is especially important on tobacco in MTL. This makes it as close as possible to smoking a cigarette, which makes it easier to switch from cigarettes to vaping and eventually quit smoking.
It’s easier to say about the bridge like this: after two puffs in the morning, the Tobacconist The World six on it leads me like a salt twenty on a one-shot HQD. At the same time, TH (throat hit) remains within the limits of ease of use.
Just a great bridge.
Yes, I’ll write again - this is a bridge for MTL (cigarette) puffs, so we can’t talk about any coil lower than 0.8 Ohm and power higher than 17 Watts. If you are a dumbass and don’t follow the accepted standards of manufacturers, then you don’t need to write on social networks: “why do I have no taste and a soot appears".