Russian (Russia) 
English (United Kingdom) In reviews of AIO devices, reviewers point out how tasty they are, but I didn’t notice this. I decided to buy a different bridge (which is inserted into the tank). And I almost got the money.
This article is intended for people over 18 years of age who want to quit smoking!
It turned out that AIO systems have two formats: Boro and DOT. Thank you guys for not selling me the dot format on the Centaurus B80, otherwise I wouldn’t have known what to do with these pieces of hardware. It turns out that in article about Centaurus B80 AIO LSVP-90-B article about Centaurus B80 AIO LSVP-90-B an error crept in where I wrote that the Centaurus B80 AIO LSVP-90-B is a DOT system (corrected).
Due to the fact that the deputies represent the tobacco lobby, we had to think about a universal device in DOT and Boro formats.
One of the latest devices that is now on everyone’s lips is the Nitrous Zaion Kit from the collaboration of the manufacturer Damn Vape and vaper Koko Sarang.
The device comes in a beautiful, neat, high-quality box that matches the color of the device itself.
The device can be used not only with DOT and BORO tanks (tanks), but also as RDA, RDTA, RTA, that is, it is completely universal.
As stated on the box, the device was born in Indonesia and made in China.
Under the foam cushion there are: instructions in Indonesian and English, a gasket for the tank, a ruler for cutting coils, two stickers and two transparent braids for the battery.
The stickers are beautiful.
The stickers are the exact size for the 18650 battery.
To change the color of the battery, you need to stick a sticker on the battery.
Next, you need to put on a transparent braid and align it in the center.
Next, you need to heat the braid with a hair dryer or something similar, at a temperature of 80 to 150 degrees Celsius, blowing evenly, and compress the braid. It is important not to overheat the battery!
The braid looks beautiful and organic.
The set also includes a mouthpiece (drip tip) made of transparent plastic and an oring (rubber ring) for it. It's a strange design, but a 510 size mouthpiece fits into the device.
As they say, a ruler for cutting legs is useless, but the manufacturer in the instructions suggests using it as a wrench for unscrewing/tightening nuts.
In this case, I received the device in Belarossa color, which is good - I like it.
The Type C charging connector is located at the bottom of the device. There are also screws for disassembling the device, covered with silicone feet.
A lot of psychosis, among some users, was caused by a button that remains red, regardless of what color the device is.
On a pink device, the button looks organic. It is impossible to understand what is depicted on it; looks like a map of the world. This whole thing shimmers in different colors. This button did not cause any rejection in me; The click is soft, but clear and audible, it does not wobble.
On one side there is a microscopic screen and two control buttons. The response of the buttons is clear, they do not wobble.
On the opposite side there is a panel covering the compartment for BORO and DOT tanks.
The panel on one of the corners makes a rattling noise, and it does not always happen.
The door is probably sanded by hand, which is why it is skewed on one side. After my door fell on the tile, the rattling stopped.
The inside of the device is made of plastic.
The information in the tank's boro compartment has been removed.
One of the disadvantages of the device is that the battery compartment cover has small threads. It takes a long time to turn. This is probably done so that the circuit resistance does not change, since the negative contact goes through the cover.
Positive contact.
The positive contact is not coated - traces of oxide are visible.
The tank mounting nut is non-standard - it has a rubber seal.
In order to use the device as a box mod there is a small part.
There is a rod to transmit voltage from the boro compartment of the tank.
The rod has a contact on the thread with which you can change the length of the rod.
To use the device as a box mod, for example for winding a bridge (a heating device that is located inside the tank), you need to completely unscrew the nut securing the tank (tank).
Then screw in the rod.
Then you can use Zaion as a box mod.
It looks neither good nor bad. You can use it.
Considering that the Damn Vape Nitrous Zaion AIO board can output from 5 to 80 Watts, it’s hard to call it a baby.
There is no circular scrolling, the power changes by one watt.
In order to be able to use DOT format containers, there is an adapter frame.
The tank with the bridge is inserted into the frame and tightened with a nut.
Then we screw the frame with the tank into the device itself.
This whole thing looks organic.
The device is small, it is even smaller than Centaurus B80 AIO LSVP-90-B.
View from Strix RBA.
I would like to criticize the supplied mouthpiece - it's just some kind of garbage. It has only one advantage - you can unscrew the nut, otherwise it is a useless thing.
In order to change the mouthpiece, it is better to remove the rubber seal from the nut.
Then the new mouthpiece number 510 will fit without problems.
Despite the fact that the Zaion weighs about 200 grams, it feels much lighter than the Centaurus B80 AIO LSVP-90-B, which weighs about the same.
Without body kit it weighs 130 grams.
Dimensions are: 73 * 55 * 24 mm.
From the first impressions: Zaion does not have such brutality as the Centaurus B80 AIO LSVP-90-B. Due to the fact that the button is soft, there are false positives in the case.
As I gain experience in owning the Nitrous Zaion Kit, I will change the article.
For the Nitrous Zaion Kit, I took the Ambition Mods Strix RBA bridge at the same time with a tank, also from Ambition. The connection turned out to be arrogant and Strix pissed on Nitrous Zaion for me twice, which overshadowed the purchase of Nitrous Zaion. More about this in the article about bridge.
PS. Pleasant to use, compact, convenient device without any disadvantages. This device is an example of the fact that expensive is not always good and the opposite: a cheap device is not always necessarily bad.